Features :
G657A 1/2
Massanger steel wire 1.0mm
Steel wire streng member 0.45mm
Cable jacket LSZH & Glue Coating Jacket
Two parallel FRP or metal reinforcements provide good compression resistance and protect the fiber
low construction cost
Suitable for mechanical splicing technology
The bend insensitive fiber which can meet requirement of ITU-T G.657 High-carbon steel wire should be used for Self-supporting strengthen member.
Application :
For indoor wiring, end users directly use fiber cables, Used for building optical fiber cable,
It is used for indoor wiring in FTTH.
1 Core 3 Seling
| Part number | IF-DCSM-1C-3S |
| Fiber core | 1 Core |
| Fiber style | G657A1 |
| Steel wire | 1.0mm x 0.45mm |
| Outer sheath | LSZH |
| Installation Temperatur range (°C) | -20+60 |
| Operation and transport temperature (°C) | -40+70 |
| Cable size (Height*width) | 2.0mm x 5.0mm |
| Cable weight | 20 Kg |
| Condition | 1310nm 1550nm |
| Attenuation | ≤0.36/0.23 dB/km |
| Radius attenuation bending | 1550nm<0.75db; 1625nm<1.5db |
2 Core 3 Seling
| Part number | IF-DCSM-2C-3S |
| Fiber core | 2 Core |
| Fiber style | G657A1 |
| Steel wire | 1.0mm x 0.45mm |
| Outer sheath | LSZH |
| Installation Temperatur range (°C) | -20+60 |
| Operation and transport temperature (°C) | -40+70 |
| Cable size (Height*width) | 2.0mm x 5.0mm |
| Cable weight | 21 Kg |
| Condition | 1310nm 1550nm |
| Attenuation | ≤0.36/0.23 dB/km |
| Radius attenuation bending | 1550nm<0.75db; 1625nm<1.5db |
4 Core 3 Seling
| Part number | IF-DCSM-4C-3S |
| Fiber core | 4 Core |
| Fiber style | G657A1 |
| Steel wire | 1.0mm x 0.45mm |
| Outer sheath | LSZH |
| Installation Temperatur range (°C) | -20+60 |
| Operation and transport temperature (°C) | -40+70 |
| Cable size (Height*width) | 2.0mm x 5.0mm |
| Cable weight | 21 Kg |
| Condition | 1310nm 1550nm |
| Attenuation | ≤0.36/0.23 dB/km |
| Radius attenuation bending | 1550nm<0.75db; 1625nm<1.5db |